Home / Shop by machine / Large square baler / Massey Ferguson 2260

Massey Ferguson 2260

Large square baler

This machine takes a two-piece driveline. You need one tractor end and one implement end from the same tier — ordering a single half will not drive the implement.

STANDARD

Tractor end — Pick the one that matches the spline on your tractor.

110 HP Wide Angle Half Shaft, Tractor End1 3/8" x 6 tractor end · 66"–105"IHW36150

$1,042

110 HP Wide Angle Half Shaft, Tractor End1 3/8" x 21 tractor end · 66"–105"IHW3615021

$1,042

110 HP Wide Angle Half Shaft, Tractor End1 3/4" x 20 tractor end · 66"–105"IHW3615020

$1,042

Implement end — Needed to complete the driveline. Pick the one that matches your implement.

110 HP Half Shaft, Implement End1 3/4" x 20 implement end · 66"–105"OH3615020

$330

P675 UPGRADE

Tractor end — Pick the one that matches the spline on your tractor.

125 HP Wide Angle Half Shaft, Tractor End1 3/8" x 6 tractor end · 68"–107"IH675130

$1,875

125 HP Wide Angle Half Shaft, Tractor End1 3/8" x 21 tractor end · 68"–107"IH67513021

$1,875

125 HP Wide Angle Half Shaft, Tractor End1 3/4" x 20 tractor end · 68"–107"IH67513020

$1,875

Implement end — Needed to complete the driveline. Pick the one that matches your implement.

125 HP Half Shaft, Implement End1 3/4" x 20 implement end · 68"–107"OH67513020

$875

Front driveline — Complete driveline. Pick the one that matches your tractor and implement.

125 HP Wide Angle CV Driveline1 3/8" x 6 tractor, 1 3/4" x 20 implement · 68"–107"W67130620

$3,177

125 HP Wide Angle CV Driveline1 3/8" x 21 tractor, 1 3/4" x 20 implement · 68"–107"W671302120

$3,177

125 HP Wide Angle CV Driveline1 3/4" x 20 both ends · 68"–107"W6713020

$3,177